Electrical System Standards
Coverage Summary
| Issue | Covered | Period | Notes |
|---|---|---|---|
| Damaged fixtures and electrical items at closing | ✓ | At closing | Must be listed on Final Walkthrough/Orientation Form |
| Light bulbs at closing | ✓ | At closing | Classic replaces bulbs listed on the Final Walkthrough/Orientation Form |
| Wiring that fails to carry its designed load | ✓ | Limited Warranty period | Repaired to meet specifications |
| Outlets, switches, or fixtures that do not function as intended | ✓ | Limited Warranty period | Repaired or replaced |
| Fixtures supplied or installed by the Homeowner | ✗ | — | Excluded from the Limited Warranty |
| Power surges and lightning damage | ✗ | — | Local conditions beyond Classic's control |
| Burned-out bulbs after closing | ✗ | — | Homeowner responsibility |
| Food spoilage from refrigerator/freezer on GFCI outlet | ✗ | — | Never plug a refrigerator or freezer into a GFCI outlet |
Performance Standards
Orientation Inspection
Standard: Light fixtures and outlets must be installed, in working condition without any defects, and all bulbs working.
Coverage: During the Final Walkthrough/Orientation Classic will confirm that light fixtures and outlets are installed, in working condition without any defects, and that all bulbs are working. Classic will only repair the electrical items (damaged fixtures) listed on the Final Walkthrough/Orientation Form.
Designed Load
Standard: Electrical wiring must carry its designed load to meet specifications, and outlets, switches, and fixtures must function as intended.
Coverage: During the Limited Warranty period, Classic will repair any electrical wiring that fails to carry its designed load to meet specifications. If electrical outlets, switches, or fixtures do not function during the Limited Warranty period as intended, Classic will repair or replace them.
Fixture and Outlet Locations
Standard: Light fixtures and outlets are installed in general locations indicated on the plans and may vary from locations shown in models and similar plans.
Coverage: Moving fixtures and outlets to accommodate specific furniture arrangements or room use is the Homeowner's responsibility.
Carbon Monoxide Alarms and Smoke Detectors
Standard: Carbon monoxide alarms and smoke detectors are installed in accordance with building codes, which dictate locations.
Coverage: Classic cannot omit any carbon monoxide alarm or smoke detector, and you should not remove or disable any smoke detector. Classic does not represent that carbon monoxide alarms or smoke detectors will provide the protection for which they are installed or intended.
Tamperproof Outlets
Standard: Due to a Federal Statute, your home will have tamperproof (childproof) outlets installed in various locations throughout the home. These locations are determined by the Statute.
Coverage: Classic cannot install non-conforming outlets in these areas.
What's Not Covered
The following are excluded from warranty coverage:
- Fixtures supplied or installed by the Homeowner - The Classic Limited Warranty excludes any fixture supplied or installed by the Homeowner
- Power surges - The result of local conditions beyond the control of Classic; these can result in burned-out bulbs or damage to sensitive electronic equipment such as TVs, alarm systems, and computers. Surge protection is suggested
- Damage from lightning strikes - Excluded from this Limited Warranty coverage
- Burned-out bulbs - Replacing burned-out bulbs is the Homeowner's responsibility after closing
- Food spoilage from GFCI-controlled outlets - Classic is not responsible for food spoilage that results from plugging refrigerators or freezers into a GFCI outlet
- Moving fixtures and outlets - Relocation to accommodate furniture arrangements or room use is the Homeowner's responsibility
Filing a Claim
If you believe you have a warranty issue:
- Check the breakers in the main panel box first - a tripped breaker must be turned off before it can be turned on
- For outlets, check whether the outlet is controlled by a wall switch or a GFCI, and confirm the GFCI is set
- Check if the issue was listed on your Final Walkthrough/Orientation Form
- Request Service
Related Standards
Care Tips: See Electrical System Use & Care for maintenance and troubleshooting guidance.