Electrical System Standards
Coverage Summary
| Issue | Covered | Period | Notes |
|---|---|---|---|
| Internal wiring not carrying designed load | ✓ | 2 years | Will repair |
| Breakers, fixtures, outlets | ✓ | 1 year | Consumer products |
| Alarm system wiring | ✓ | 2 years | If original wiring not modified |
| Burned out bulbs | ✗ | At closing | Only if on orientation form |
| Power surge damage | ✗ | — | Weather/utility related |
| Homeowner-installed fixtures | ✗ | — | Not covered |
| Fixture/outlet relocation | ✗ | — | Unless documented before closing |
Total loss of power (after confirming no area outage) qualifies as an emergency. Call 719-592-9333 immediately.
Performance Standards
Internal Wiring
Standard: Internal wiring should carry the electrical load for which it was designed.
Coverage Period: 2 years
Measurement: If wiring fails to carry the designed load, Classic Homes will repair the affected wiring.
Breakers, Fixtures, and Outlets
Standard: All electrical breakers, fixtures, and outlets should function properly at closing and throughout the first year.
Coverage Period: 1 year (consumer products)
At Orientation: Classic Homes confirms that:
- Light fixtures and outlets are installed and working
- All bulbs are operable
- No defects in electrical components
Alarm System Wiring
Standard: Alarm system pre-wire should function properly if the original wiring has not been modified.
Coverage Period: 2 years
What's Not Covered
The following are excluded from warranty coverage:
- Power surge damage - Damage from lightning or utility power surges is excluded (we cannot control weather or utility conditions)
- Homeowner-installed fixtures - Fixtures installed after closing are not covered
- Fixture/outlet relocation - Moving fixtures or outlets is not covered unless documented before closing
- Trip fees for non-wiring issues - If the problem isn't an internal wiring issue, trip fees may apply
- Burned out bulbs - Light bulb replacement is your responsibility (only replaced if listed on orientation form)
- Modified alarm wiring - Alarm system wiring that has been altered during installation by a third party
Filing a Claim
If you believe you have a warranty issue:
- Review the Use & Care Guide for troubleshooting steps
- Gather information:
- Specific outlets or circuits affected
- Whether breakers are tripping
- Whether GFCI outlets have been tested/reset
- Request Service
Related Standards
Care Tips: See Electrical Use & Care for maintenance and troubleshooting guidance.